Metal Filters

Metal filter

Industrial Metal Mesh Filters for Aerospace and Defense Systems

If your aircraft, helicopter, submarine, or naval vessel depends on clean fluid systems, the filtration media you choose directly affects mission readiness.

FCP’s aerospace metal filters are the proven choice for applications where contamination and media degradation create operational risk. We’ve engineered precision metal filtration systems since 1943 for the platforms that can’t afford failure.

AS9100 (Rev. D) Certified. NADCAP Approved Supplier.
Your metal mesh filters are manufactured under a certified quality management system with full traceability from raw material to finished part. You’re not guessing on quality or compliance. It’s built into every filter we ship.

nadcap certified logo
AS9100-certified logo

Why Metal Mesh Filters Outperform Traditional Filter Media in Aerospace and Industrial Applications

Traditional filter media fail in the same conditions your systems operate in every day. Here’s why metal filtration is the better choice.

A mechanic works on the engine of a small plane.

Legacy Filters Fail Under Pressure

Fiberglass and paper filter media shed particles as adhesive binders degrade under pressure, directly contaminating the systems they protect.

A military helicopter on a runway.

Metal Filters Reduce Maintenance Costs

U.S. Army and Boeing 737 testing showed all-metal filters cut maintenance by up to 10 times, with fleet-wide savings of approximately $4 million per 100 flight hours.

A close-up of a metal mesh filter.

Metal Filtration Controls Contamination

FCP metal mesh filters use epoxy bonding or brazing to prevent media shedding. Military testing showed approximately 95% contamination reduction.

A two-year U.S. Army study on 60 H-60 Black Hawk aircraft at Fort Rucker, Alabama documented what metal fiber media does when it replaces glass fiber media in a military hydraulic system. MTBF doubled for hydraulic pumps and primary servos. SAS actuator MTBF increased by more than 50%. In AGPU applications, hydraulic fluid reached Class 0 cleanliness, a level the Army described as previously unheard of. The Army estimated fleet-wide savings of approximately $4 million per 100 flight hours and issued an Aviation Maintenance Action Message directing conversion of the full AH-64 Apache and H-60 Black Hawk fleets to metal fiber media filter elements within three years. That’s the documented performance difference metal mesh filtration makes.

Source: Army Aviation Magazine, December 2022

In the Field: AH-64 Apache and H-60 Black Hawk

Published Army research confirmed that metal fiber media filter elements installed in the hydraulic systems of the AH-64 Apache and H-60 Black Hawk required no modification to existing aircraft architecture. After installation, MTBF doubled for hydraulic pumps and primary servos, SAS actuator MTBF increased by more than 50%, and hydraulic fluid reached Class 0 cleanliness in AGPU applications. If your platform runs a hydraulic system with similar demands, the case for metal mesh filtration is fully documented.

Metal Mesh Filtration Systems for Aerospace, Defense, and Naval Applications

Woven metal mesh filters have been real-life tested against fiberglass across military and commercial platforms, and the results are consistent across every application.

Here is how metal mesh filtration performs across the platforms your systems support.

jet icon

Military Jets

FCP metal mesh filters offer ratings as low as 3 microns and do not shed media, protecting military aircraft hydraulic systems under extreme operating conditions.

helicopter icon

Helicopters

Testing on 120 helicopters over 36,000 hours showed failure rates across the hydraulic pump, primary servo, SAS actuators, and tail rotor servo dropped from 88% to 92%.

aerospace icon

Other Aerospace

Metal mesh filters reduce costs across hydraulic, lube, air, oil, fuel tank inerting, and APU applications by cutting replacement frequency and extending component life.

ship icon

Marine

FCP metal mesh filters use corrosion-resistant materials to deliver reliable contamination control in saltwater, variable pressure, and continuous duty cycle environments.

Filter Performance and System Protection

FCP metal mesh filters are engineered to perform across a full range of fluid types and operating conditions. Here is what that means for your system.

Contamination Reduction Performance

Military and commercial testing consistently showed metal mesh filters reduce hydraulic system contamination by approximately 95% compared to fiberglass media. Cleaner fluid means fewer component failures, longer service intervals, and more predictable system behavior in the field.

Maintenance Reduction and System Longevity

Fiberglass filters that shed media create a second contamination source inside your own system. Metal filtration systems eliminate that problem. Documented Army testing on AH-64 Apache and H-60 Black Hawk platforms showed all-metal filters reduced maintenance times by as much as 10 times, directly improving mission readiness.

Filter Ratings and Media Integrity

FCP metal mesh filters are available with absolute filter ratings as low as 3 microns. Each woven wire filter is assembled using epoxy bonding or brazing, protecting the mesh structure and maintaining rated performance for the full service life of the element.

FCP Metal Mesh Filter Products

FCP manufactures a full range of precision metal filtration products for aerospace, defense, and naval programs. Every product is engineered for the pressure, temperature, and contamination demands of mission-critical equipment.

Hydraulic Filters

Designed for high-pressure hydraulic systems in military aircraft, helicopters, and naval vessels. Metal mesh construction prevents media migration and maintains fluid cleanliness across extended service intervals.

Oil Filters

Built for demanding lubrication systems in aerospace and defense equipment. FCP oil filters hold rated filtration performance under the high temperatures and pressure cycles that degrade traditional filter media.

Air Filters

Metal mesh air filters provide reliable particle removal for bleed air, pneumatic, and environmental control system applications. No binder degradation means no secondary contamination introduced by the filter itself.

Water Filters

Corrosion-resistant metal mesh water filters serve hydraulic cooling, ballast, and fluid management systems in naval and marine applications where saltwater exposure would degrade traditional media.

Filter Housings

FCP designs and manufactures filter housings matched to your system’s pressure, flow, and dimensional requirements. Options include built-in drain and easy-change element configurations that reduce maintenance time in the field.

Strainers and Baskets

Metal strainers and baskets remove larger particles from fluid streams without shedding media into the system. Used upstream of finer filtration stages, they extend service life and protect precision components.

Mechanical Differential Pressure Indicators

FCP’s mechanical differential pressure indicators (DPIs) signal operators when a filter element needs to be serviced. Fully mechanical with no electrical components, our DPIs add no additional wiring, power requirements, or failure points to your system.

Why Defense and Aerospace Engineers Choose FCP

Your program deserves a filtration partner with a proven record in aerospace and defense. FCP’s metal mesh filters are trusted by GE Aviation, Raytheon Technologies, Lockheed Martin, Northrop Grumman, General Dynamics, and the U.S. Department of Defense. You are not working with an unproven supplier. You are working with the manufacturer those programs rely on.

Trusted by the programs that define the standard.

FCP’s metal mesh filters have been specified by GE Aviation, Raytheon Technologies, Lockheed Martin, Northrop Grumman, General Dynamics, and the U.S. Department of Defense. You’re not taking a chance on an unproven supplier. You’re working with the manufacturer those programs trust.

Department of Defense logo
GE Aviation logo
lockheed martin logo
Raytheon logo
northrop grumman logo
General Dynamics Electric Boat logo
A person taking notes on a clipboard.

A Commitment to Quality

Your metal mesh filter needs to perform every time, in every condition. Every FCP filter is built from corrosion-resistant materials and held to strict aerospace and defense filtration standards, from production through delivery.

A Proven Manufacturing Process

Your program requires a supplier you can qualify and count on. FCP holds AS9100 (Rev. D) certification and NADCAP approval, confirming our metal filtration systems meet the manufacturing and quality standards your application demands.

A metal filter.
A marine and three veterans facing an American flag and saluting.

We Are Heroes Helping Heroes

Your mission matters to us. As a Service-Disabled Veteran-Owned Small Business (SDVOSB), we build every metal mesh filter knowing it supports the safety and mission readiness of the men and women who serve in military, aerospace, and naval programs.

At FCP, we see ourselves as heroes helping heroes. We’re committed to delivering products that meet the highest quality and performance standards, helping our customers overcome operational challenges and achieve their goals. Your mission is our mission, and we’re here to support you every step of the way.

Made in the USA logo
We Support Veterans logo

Made in the USA. Service-Disabled Veteran-Owned Small Business.

Since 1943, we’ve manufactured precision filtration products for the programs that can’t accept failure. Our engineering team is here to support your next RFQ, technical inquiry, or custom design requirement. We’ve been building for your mission for more than 80 years, and we’re not slowing down.

Frequently Asked Questions About Metal Mesh Filters

Metal mesh filtration raises technical questions from engineers and procurement teams evaluating a switch from traditional media. Here are the answers to the most common ones.

What is the finest filtration rating FCP metal mesh filters can achieve?

FCP metal mesh filters are available with absolute filter ratings as low as 3 microns. This covers the majority of hydraulic, oil, air, and water filtration requirements across aerospace and defense applications.

Why do fiberglass filters fail in aerospace and defense systems?

Fiberglass and cellulosic filters rely on adhesive binders to hold their fiber structure together. Under high-pressure, high-temperature, or high-cycle conditions, those binders break down, and the filter sheds particles into the fluid stream, adding contamination instead of removing it.

How are FCP metal mesh filters assembled?

FCP filters are assembled using epoxy bonding or brazing, not welding. This protects the mesh structure from damage and maintains a stable, durable filter element that holds its rated performance across the full service life of the component.

What contamination reduction can I expect from metal mesh filters?

Military and commercial testing has shown contamination reductions of approximately 95% in hydraulic systems after switching from fiberglass to metal fiber media. Your results will depend on system configuration and operating conditions.

What does the helicopter testing data show?

A 36,000-hour test on 120 helicopters showed failure rates in the hydraulic pump, primary servo, SAS actuators, and tail rotor servo dropped between 88% and 92% with all-metal filters. U.S. Army analysis estimated fleet-wide savings of approximately $4 million per 100 flight hours.

What does a mechanical differential pressure indicator do?

A mechanical differential pressure indicator (DPI) monitors the pressure differential across a filter element. When that differential reaches a set point, the DPI signals the operator that the filter needs to be serviced. FCP’s DPIs are fully mechanical with no electrical components.

Are FCP metal mesh filters a drop-in replacement for existing fiberglass filters?

In most cases, yes. Metal fiber media filters can be configured as direct replacements for fiberglass elements in existing housings with no modification to the system architecture required. Contact our engineering team to confirm compatibility with your application.

What fluid types are FCP metal mesh filters rated for?

FCP metal mesh filters are designed for hydraulic fluid, oil, water, air, bleed air, fuel, and coolant applications. Our filters are suited for high-viscosity, high-temperature, and corrosive fluid environments common in military and aerospace equipment.

Is FCP a qualified aerospace and defense filtration supplier?

Yes. FCP is AS9100 (Rev. D) certified and holds NADCAP approval. Both certifications verify that our manufacturing processes and quality management systems meet the standards required for aerospace and defense filtration supply chains.

How do I request a quote or technical information from FCP?

Contact FCP’s engineering team directly through our website. Provide your application details, fluid type, flow requirements, and operating conditions, and we will identify the right metal filtration solution for your system.


We Are Proud To Support Our Troops